
CR318C
共轨喷油试验台
博世IQA码生成
1QA码能自定义修改每工况
喷油量而不需要维修喷油器
喷油器衔铁行程升程测试
轨压可达2600巴
连续24小时工作油温不高于42度
设备可靠性高全年运行无故障
响应时间测试
电磁阀电阻测试
电磁阀电感测试
开启脉宽测试
开启压力测试
选配功能
博世6、7、8、9、10位数IMA编码生成
博世压电IMA、ISA编码生成
电装QR油量修正码生成
德尔福I2C、I3C编码生成
西门子(VD0)ICC编码生成
技术参数 | |
供电电压 | 220VAC/380VAC |
相数 | 单相/三相 |
频率 | 50Hz/60Hz |
电流 |
30A(Max) |
电机功率: 油温控制 |
5.5Kw 加热/强制冷风 |
油温设定 | 40摄氏度 |
使用环境温度 | 小于35摄氏度 |
最大共轨压力 | 180-240Ma |
共轨泵 | Bosch CP3.3 |
控制回路电压 | DC24V/DC12V |
ECU内部升压 | 0-200VDC(Max) |
测试油箱容积 | 19升 |
噪音水平 | <85dB |
重量 | 350kg |
外观净尺寸 | (长x宽x高)140×78×158cm |
包装后木箱 | (高x宽x长)150×85×165cm |
CR318C
Common rail injection test bench
Bosch IQA code generation
IQA code can be customized to modify each condition
Fuel injection without the need to repair the injector
Injector armature stroke lift test
Rail pressure up to 2600 bar
The working oil temperature is not higher than 42 degrees for 24 hours.
High reliability of equipment, no failure throughout the year
Response time test
Solenoid valve resistance test
Solenoid valve inductance test
Turn on the pulse width test
Open stress test
Optional function
Bosch 6, 7, 8, 9, and 10 digit IMA encoding generation
Bosch piezo injector IMA, ISA encoding generation
DENSO QR oil correction code generation
Delphi C2i, C3i encoding generation
Siemens (VD0) ICC code generation
Technical parameters | |
Power supply | 220VAC/380VAC |
Phase | Single phase/ Three phase |
Frequency | 50Hz/60Hz |
Current | 30A(Max) |
Motor Power | 5.5Kw |
Oil temperature control | Heating /strong cooling wind |
Oil temperature setting | 40 degrees Celsius |
Use ambient temperature | less than 35 degrees Celsius |
Maximum common rail pressure | 180-240Mpa |
Common rail pump | Bosch CP3.3 |
Control loop voltage | DC24V/DC12V |
ECU internal boost | 0-200VDC(Max) |
Test tank volume | 19L |
Noise level | <85dB |
Weight | 350kg |
Net size | (L*W*H)140*78*158cm |
Wooden package size | (L*W*H)165*85*150cm |